SOP 2.7mm Interlocking Plate - 13 hole
Product Description
The 2.7mm SOP Interlocking plate is available from 3 to 16 holes in length. A 20 hole plate is available for special order. The 2.7mm system requires the use of bending tees during bending and twisting (Product code 800400127). The hole spacing is 8mm from centre to centre of the screw holes and allows close positioning of 2 plates alongside each other and therefore position 3 screws in a 8mm fragment if necessary. Dedicated bending irons, drill guide and bending tees are necessary and are listed separately.
Unlike other existing systems, such as DCPs which are notably weak around the screw holes and many other locking plate systems being expensive and requiring specific screws, the SOP™ system has:
- More versatility (less kit needed)
- Increase stiffness (fewer complications/failures)
- Locking technology (mechanical advantage)
- MIS compatible (biologic advantage)